Commercial Ladder Racks

Truck & Van Ladder Racks

Ladder racks for pickups, caps, service bodies and vans from System One, Thule TracRac, Vantech and WeatherGuard. Aluminum and steel, up to 1,700 pounds.
Fitment Matters!
Fitment Matters!

Industry leading tech to find the right roof rack for your truck or van in just a few clicks

Commercial Ladder Rack
Trust the nation's leading Auto Rack Specialty Store: Our Rack Specialists offer three decades of invaluable knowledge, expertise, and hands-on experience.
Fit your truck or vanVehicle icon

A ladder rack is chosen by the truck or van it bolts to, not by the ladder. On a pickup, an over-bed rack carries ladders, lumber and pipe above the bed and leaves the bed usable; clamp-on racks grip the bed rails with no drilling, while bolt-on racks are fixed through the bed (drilling required). The mount decides whether you drill, not what the rack carries. Trucks with a cap take a rack built for the cap, and service bodies take their own. On a van, the roof decides the mount: fixed points, rain gutters or factory tracks.

We carry System One, Thule TracRac, Vantech and WeatherGuard, in aluminum for weight and corrosion and steel for cost. Heavy-duty aluminum racks carry up to 1,250 pounds. Tell us the year, model, bed length and whether you have a cap or a tonneau, and we will confirm the rack and the mounting hardware before you order. Call 1-800-272-5362.

Since 1991, America's #1 trusted rack store

Truck & Van Ladder Racks Buying Guide

Start with what the rack mounts to

A ladder rack is a set of crossbars held above the vehicle, so ladders, pipe and lumber ride on top and the space underneath stays usable. Which one you need is decided by what the rack mounts to, not by the ladder. A pickup with an open bed takes an over-bed truck ladder rack, which clamps to the bed rail, bolts through the bed or fastens into the stake pockets. A pickup with a cap or topper takes a cap rack, because the cap covers the bed rails an over-bed rack would hold. A utility or service body takes a service body rack bolted to the top of the body. A cargo van takes a van rack matched to its roof, and a box truck or enclosed trailer takes a box truck rack mounted on the top or the side of the box. A headache rack does a different job: it is a guard behind the cab that protects the rear window from a load sliding forward.

After the mount comes the load. The rack's rating, the mount's rating and what the vehicle can still carry are three different numbers, and the lowest is the one you live with: a rack rated 1,250 pounds on a truck with 900 pounds of payload left is a 900 pound rack. On a van, the roof's own load rating is part of that sum.

Compare ladder racks by vehicle

Compare ladder racks by vehicle
What you driveRackHow it mountsRatings we carryCheck before ordering
Pickup, open bedOver-bed truck ladder rackClamps to the bed rail, bolts through the bed (drilling required) or fastens into the stake pockets150 to 1,700 poundsBed length, cab height and any tonneau cover or bed liner
Pickup with a cap or topperCap rackBolts to the cap shell500 pounds (Vantech H1090 and H2098)The cap maker and model, and what the cap is rated to carry
Utility or service bodyService body rackBolts to the top of the body (System One racks do not fit flip-top bodies)600 to 1,250 poundsBody length and the height from the body top to the cab roof
Cargo vanVan rackFactory fixed points, rain gutters or roof tracks300 to 800 poundsYear, model, roof height and wheelbase
Box truck or enclosed trailerBox truck rack (Vantech H1, in steel or aluminum)On top of the box or on its sideNot stated by the makerTop or side mount, and the size of the box
Any pickup, behind the cabHeadache rack (BackRack in steel, WeatherGuard in aluminum)BackRack fastens into the stake pockets with no drilling on most trucks; a truck without stake pockets needs drillingA cab guard; the BackRack top crossbar supports ladders and other long loadsStake pockets; BackRack does not fit GM Stepside or Ford Flareside beds

Aluminum or steel

The metal does not set the capacity. The highest-rated rack we carry is steel, the WeatherGuard 1175-52-02 at 1,700 pounds for Super Duty, Ram 2500 and 3500 and Chevy and GMC HD trucks, and so are two of the lowest: the Thule TracRac Contractor Steel and the WeatherGuard Weekender 1450 are rated 250 pounds. The highest-rated aluminum racks, the System One Contractor Rig, Thule TracRac SR and Thule TracRac UtilityRac G2, carry 1,250 pounds. Read the rating, not the metal.

What the metal decides is rust, weight and price. Aluminum does not rust, and a lighter rack leaves more of the vehicle's payload for the load, which is worth paying for on a truck that sees road salt. Steel costs less: the steel Vantech H2651 Sprinter rack costs less than the aluminum Vantech H2665 and both are rated 500 pounds, and the steel Vantech H1090 cap rack costs less than the aluminum H2098 for the same 500 pound rating.

On a van, the roof decides

A van rack mounts one of three ways, and the van chooses it for you. Factory fixed points are pre-drilled holes or pegs on the roof. Rain gutters are the lip running along the edge of the roof. Roof tracks, factory or added, let you set the distance between the bars. Which one your van has is set by its year and model, which is why we list van racks by manufacturer. Some racks also need a mounting channel kit for your van (sold separately): the WeatherGuard 209-3-03 takes one on a Transit, ProMaster or mid or high roof Sprinter.

Two choices remain. The number of bars sets the rating: on the Vantech low profile Sprinter racks and the Thule TracRac TracVan, a two-bar rack is rated 500 pounds and a three-bar rack 750. Then loading: a drop-down rack such as the WeatherGuard EZGlide2 lowers the ladder to the side of the van for loading, and costs more than a fixed rack.

Call 1-800-272-5362 with the year and model, the bed length or the van's roof height and wheelbase, what is already on the vehicle (a cap, a tonneau cover, a toolbox) and the heaviest load you carry in a normal week, and a Rack Specialist will confirm the rack, the mounting kit and the clearance.

Common questions

How much weight can a ladder rack hold?

The racks we carry are rated 150 to 1,700 pounds: 150 on the light-duty Vantech RamBox racks and 1,700 on the steel WeatherGuard 1175-52-02. Service body racks run 600 to 1,250 pounds and van racks 300 to 800. The number that applies is the lowest of the rack's rating, the mount's rating and what your truck or van can still carry.

Is an aluminum ladder rack better than steel?

Not for capacity: the highest-rated rack we carry is steel, at 1,700 pounds, and the highest-rated aluminum racks carry 1,250. Aluminum does not rust and weighs less, so it leaves more payload for the load. Steel costs less: the steel Vantech H2651 Sprinter rack costs less than the aluminum H2665 for the same 500 pound rating.

Can you lock a ladder rack?

Parts of it. Thule TracRac Locking TracKnobs lock the sliding overheads of the TracRac SR and G2 racks to their base rails (sold separately). For pipe and conduit, the Vantech and System One conduit carriers take a padlock (not included).

Will a ladder rack fit a truck with a cap?

Not an over-bed rack: the cap covers the bed rails it would hold. A cap rack bolts to the shell instead, so we need the cap maker and model as well as the truck, and the cap's own rating limits the load. See truck cap and topper ladder racks.

Which ladder rack fits my van?

The one matched to its roof: factory fixed points, rain gutters or roof tracks, which the year and model decide. Start from van racks by manufacturer, or call 1-800-272-5362 with the year, model, roof height and wheelbase and a Rack Specialist will confirm the rack and the mounting kit.

Do I need to drill my truck for a ladder rack?

Not always. Clamp-on racks grip the bed rail and leave no holes, though they need open access under the rail, and a BackRack headache rack fastens into the stake pockets with no drilling on most trucks. See non-drilling truck racks.

Is a headache rack the same as a ladder rack?

No. A headache rack is a guard behind the cab that protects the rear window from a load sliding forward. A BackRack's top crossbar supports ladders and other long loads, and it fastens into the stake pockets with no drilling on most trucks (a truck without stake pockets needs drilling).

Don't take our word for it, hear what our customers are saying…

Review image 1
Review image 2
Review image 3
Review image 4
★★★★☆
4.9
out of 505 reviews
Read more reviews

"The staff at Rack Warehouse kept me informed on my order"

"The staff at Rack Warehouse kept me informed on my order, which was back ordered and gave me options for a different rack."
- George Wallace 1d ago

Browse racks by lifestyle