Kayak Racks Buying Guide
Choose how the kayak rides
A kayak rack is a set of cradles that clamps to your crossbars and holds the boat in one of three positions: on its side in a J-shaped cradle, flat on its hull in saddles or on edge against an upright post. None of them attaches to the roof itself, so you need crossbars first. If your roof is bare, start with a roof rack and we will fit both.
The style is decided by the boat, not by the car, and two things about the boat decide it. Width and weight come first. A J-style rack holds one boat on its side; hull-style saddles carry it flat and spread its weight along the hull, which is why wide sit-on-top and fishing kayaks ride in them. The number of boats comes second: two J-style racks fit side by side on long enough bars, and a multi-kayak rack or stacker holds up to four on edge.
J-style racks take less of the bar and load from the side at roof height; saddles take more of the bar, and on models with felt-lined rear saddles or rollers you slide the boat on from behind.
The lift is the part people underestimate. Every style above has you raising the boat toward roof height at some point, and that is the job a kayak load assist takes over, by bringing the cradles down the side of the vehicle or rolling the boat on from the rear.
Compare the carrying styles
| Style | How the boat rides | Boats | Limit | Loading |
|---|---|---|---|---|
| J-style | On its side | One per rack; the Yakima JayLow carries two upright | 75 to 80 pounds (Malone J-Pro2, Yakima JayHook) | Lifted at the side, at roof height |
| Hull-style saddles | Flat on its hull | One per set | 75 pounds (Thule Top Deck) to 150 pounds (Yakima BigCatch, Malone MegaWing) | Slid on from the rear on felt-lined or roller models |
| Stacker | On edge against a post | Up to four (Thule Stacker, Yakima BigStack) | Not for fiberglass boats (Thule Stacker, Malone Stax Pro2) | Lifted at the side, one boat at a time |
| Load assist | In cradles or saddles that come down to you | One | 75 pounds (Thule Hullavator Pro); 80 pounds (Yakima ShowDown) | The Hullavator Pro cuts the lift by 40"; the ShowDown loads at waist height |
| Hitch bed extender | In the bed or on a bed rack, tail on a bar at the hitch | Whatever rides in the bed | 300 pounds (Yakima LongArm, lower positions); 375 pounds (Malone Axis) | At bed height, from a 2" receiver |
Kayak racks for trucks
A pickup gives you three places to carry a kayak: over the bed on a rack, in the bed with the tail supported at the hitch or on crossbars over the cab. A truck bed rack keeps the bed free and holds a long boat level; the trade is a higher lift, 29" above the bed rails on the Malone TradeSport, which we sell in bundles with Malone kayak cradles. A kayak hitch rack, which is a bed extender in the receiver, costs less and loads at bed height; the trade is that it takes your 2" receiver, so you cannot tow at the same time. The Yakima LongArm adds up to 48" of support behind an open tailgate (roof height needs its Height Extension, sold separately).
Check your crossbars before you order
Three things decide whether a kayak rack fits the bars you have: the bar shape, the space on the bar and what the roof can carry. Most kayak cradles fit round, square and aero bars and most factory bars with the hardware in the box; Yakima RoundBars need an adapter for the Yakima JayLow and JayHook (sold separately). Load assists are stricter: the Yakima ShowDown needs at least 3.5" of crossbar past the tower and does not fit factory or flush-mounted bars, and the Thule Hullavator Pro is specified for Thule crossbars. The weight limit is your vehicle's roof rating, boat and rack together. For storing boats at home, kayak storage racks hold them on a garage wall or a free-standing frame.
Call 1-800-272-5362 with the year and model, the crossbars on your roof and the length, width and weight of your boat, and a Rack Specialist will confirm the carrier, any adapter and whether your bars have room for it.
Common questions
Can you put a kayak rack on a car?
Yes, once it has crossbars. A kayak rack clamps to the bars, not to the roof, so a bare roof or side rails without crossbars need a roof rack first. Enter your vehicle in the fit guide and we will show the crossbars that fit.
Can I put a kayak directly on a roof rack?
You can, but on bare bars the hull rests on two narrow points and can shift or dent under strap tension. A J-cradle or saddles hold the hull in shape and give the straps something to pull against. Use bow and stern lines either way.
What is a kayak cradle?
A cradle is the part of the rack that touches the boat. A J-cradle holds it on its side; a hull cradle, also called a saddle, holds it flat. Most are sold as a set for one boat, but Yakima DeckHand saddles come in pairs and one boat needs two pairs.
How do I carry two kayaks on one car?
Two J-style racks side by side, if your bars are long enough; one folding rack that carries two upright, such as the Yakima JayLow or Thule Compass; or a stacker. Each boat needs its own straps, and the Thule Stacker and Yakima BigStack come with straps for one.
What kayak rack do I need for a fishing kayak?
Saddles rated for the weight. Fishing and sit-on-top kayaks are wide and heavy, so they ride flat: the Yakima BigCatch and Malone MegaWing each carry one boat up to 150 pounds (the MegaWing does not work with the Malone Telos load assist). Check boat and rack together against your roof rating.
Will a kayak rack fit my factory crossbars?
Usually. Most kayak cradles fit factory bars with the hardware in the box. Load assists are the exception: the Yakima ShowDown does not fit factory or flush-mounted crossbars. Oversize bars can need an 80mm bolt kit for Malone cradles (sold separately).




































